PG-5

By using the adjusting screw, the cutting depth (0-5mm) can be adjusted  according to the thickness of the outer insulation.
To begin cutting in either direction, the blade is pressed and guided by  operator's thumb .
The cutting of the outer insulation is achieved by means of small move  ments and pressure on gear towards the insulation at the same time.
The blade can be turned between length and diameter cutting at any time.
In order to remove the joint of the insulation the blade must be pressed into the insulation.

Changing the blade:
By removing the adjusting screw, the double-ended blade can be changed.

SK-40 / SK-50

Range of use: The tool is applicable for stripping the external insulation  layer of cable less than 35kV.
Operating instruction: The tool comprises of the base (1), the moving seat  and the frame (3).
The blade can be held in the moving upper part by the screw. And the  repairing blade can be fixed on the two planes by the attached inner  hexagon spanner easily.
When the tool turns clockwise along cable, it can move automatically with  the direction of cable.
It can be adjusted by the adjusting screw.
Note: The product has the adjusting screw.

Conditions for storage:
The tools should be kept in a dry place without dust, and treated for  anticorrosion.
Temperature -10--- ~50. Air RH 70% ± 10%.

Package:
The tool is provided with package. The kit includes the outer and inner  hexagon spanners, and the plastic suitcase for the tool.

For stripping the insulation layer of the cable between Ø15-30mm Stripping  thickness can be adjusted The knives cannot touch the metal cable cores when stripping Knives can be sharpened or replaced.

For stripping the insulation layer of the cable between Ø15-40mm Stripping  thickness can be adjusted The knives cannot touch the metal cable cores when stripping Knives can be sharpened or replaced.

For stripping the end and the middle of the conducting wire and cable between  Ø10-45mm Stripping thickness can be adjusted The knives cannot touch the metal cable cores when stripping Knives can be sharpened or replaced.

For stripping the end and the middle of the conducting wire and cable  between Ø40-90mm Stripping thickness can be adjusted The knives cannot  touch the metal cable cores when stripping Knives can be sharpened or  replaced

For stripping the end insulation layer of the cable between Ø15-65mm  Stripping thickness can be adjusted The knives cannot touch the metal cable  cores when stripping Knives can be sharpened or replaced

For stripping the insulation layer, thickness less than Ø30mm,For stripping  the main insulation layer of the power cable less than 4.5mm,Stripping  thickness can be adjusted The knives cannot touch the metal cable cores when  stripping Knives can be sharpened or replaced

For stripping the end insulation layer of the overhead power cable  (below10KV) between 35mm2-300mm2 Stripping thickness can be adjusted The knives cannot touch the metal cable cores when stripping  Knives can be sharpened or replaced

Fixed hook blade
No damage of the conductor cores
Blade made of stainless steel
Ergonomically designed safety handle
With transparent protective cap

Fixed hook blade, suitable for sector cables

Fixed straight blade

Fixed straight blade

Fixed hook blade